Products
Products > Compact Containers > 42 CU YD CLOSED TOP RECTANGULAR RECEIVER

<< Return

42 CU YD CLOSED TOP RECTANGULAR RECEIVER

GENERAL:

CAPACITY- 42 CUBIC YARDS
LENGTH- 22'
WIDTH- 8'
INSIDE HEIGHT 92"
WEIGHT- APPROXIMATELY 6,900 #

FLOOR:

3/16" FLOOR PLATE (2) PIECE
3" STRUCTURAL CHANNEL CROSS MEMBERS ON 18" SPACING.
GUSSETS EVERY OTHER CROSS MEMBER-3/16" PLATE
6" X 2" X 1/4" STRUCTURAL TUBE RAILS, ONE PIECE NO SPLICES
1 1/4" THICK STEEL SOLID BULLNOSE
1 1/4" THICK HI-TENSILE HOOK, INSERTED THROUGH 1" THICK STEEL HOOK PLATE.
4" DIAMETER X 6" LONG NOSE ROLLERS
3/4" SUPPORT BRACKET FOR NOSE ROLLERS W/1/2" GUSSET PLATE
(4) WHEELS- 8" DIAMETER X 10" LONG WITH GREASE FITTING

SIDES:

12GA. SHEET SIDES 92" HIGH.
VERTICAL SIDE RIBS - 12GA. STEEL 4 WAY BEND, 3" DEEP, X 5" WIDE, ON 24" CENTERLINE
W/ HOLES AT BOTTOM FOR DRAINAGE
FORMED TUBES & SIDE PLATE ARE FULL WELDED TO FLOOR PLATE ON OUTSIDE.
COMPACTOR LOAD BINDER ATTACHMENT PLATES SHALL BE 1/2" X 10" X 48" FULLY
WELDED TO SIDE TUBES & BOXED IN W/3" STRUCTURAL CHANNEL

ROOF:

12GA. PLATE
12GA. STRUCTURAL ROOF TUBES - 3" DEEP X 5" WIDE 4-WAY BEND ON 24" CENTERLINE, TUBES TO INTERLOCK WITH SIDE TUBES.

DOORS:

12GA. SHEET
4 x 3 x 3/16 DOOR FRAME, (4) HORIZONTAL AND (2) VERTICAL STRUCTURAL TUBES
(4) MACHINED HINGES 8" LONG, W/GREASE FITTINGS.
SEMI-AUTOMATIC CAM LOCKING SYSTEM WITH VERTICAL LIFT HANDLE.
REAR CORNER POSTS 3" X 4" X 3/16 TUBING

BULKHEAD:

12GA. SHEET
4 X 3" X 1/4 TUBE WITH 24 X 48 X CRASH PLATE

PAINT:

SHERWIN WILLIAMS PAINT
CONTAINER SHALL BE THOROUGHLY SCRAPED AND CLEANED.
PRIMED INSIDE AND OUT WITH (1) COAT LOW V.O.C. ALKYD PRIMER, APPROX 3 MIL THICK
FINISH COAT TO BE HIGH SOLID LOW V.O.C. ENAMEL, APPROX 3 MIL THICK
STANDARD COLORS ONLY.

 

© Copyright 2018, Louisiana Container Company. All rights reserved.