Products
Products > Roll-Off Containers > 11 CU YD STANDARD RECTANGULAR

<< Return

11 CU YD STANDARD RECTANGULAR

GENERAL:

CAPACITY- 11 CUBIC YARDS
LENGTH- 12'
WIDTH- 8'
INSIDE HEIGHT 41
WEIGHT- APPROXIMATELY 3000 #
MEETS ALL AMERICAN NATIONAL STANDARD SAFETY CODES

FLOOR:

3/16" FLOOR PLATE (2) PIECE
3" STRUCTURAL CHANNEL CROSS MEMBERS/ 18" SPACING
GUSSETS EVERY OTHER CROSS MEMBER
6" X 2" X 3/16" STRUCTURAL TUBE RAILS, ONE PIECE NO SPLICES.
1 " THICK STEEL SOLID BULLNOSE
1 1/4" THICK HI-TENSILE HOOK INSERTED THROUGH 1" THICK STEEL HOOK PLATE.
4" DIAMETER X 6" LONG NOSE ROLLERS
3/4" SUPPORT BRACKET FOR NOSE ROLLERS W/1/2" GUSSET PLATE
(4) WHEELS- 8" DIAMETER X 10" LONG.

SIDES:

12 GA SHEET SIDES 41" HIGH
STRUCTURAL SIDE 12 GA. STEEL 4 WAY BEND, 3" DEEP, X 5" WIDE, ON 24"
CENTERLINE W/ HOLES AT BOTTOM FOR DRAINAGE
3/4" PIPE TIE DOWN BAR.
FORMED TUBES & SIDE PLATE ARE FULL WELDED TO FLOOR PLATE ON OUTSIDE.
3" X 4" X 12 GA. TOP HORIZONTAL TUBE FULL WELDED TO SIDE SHEET.
2" X 2" PROTECTIVE ANGLE OVER HOLD BACK PIPE

DOORS:

12 GA SHEET
(3) HORIZONTAL AND (2) VERTICAL STRUCTURAL TUBES, PRIME MATERIAL (1) PC.
(2) MACHINED HINGES 8" LONG, W/GREASE FITTINGS.
SEMI-AUTOMATIC CAM LOCKING SYSTEM WITH VERTICAL LIFT HANDLE.
REMOVABLE HINGE PINS WITH FASTENERS

BULKHEAD:

12 GA SHEET
3" DEEP X 5" WIDE STRUCTURAL 12 GA. STEEL, 4-WAY BEND.(2) VERTICAL &
(1) HORIZONTAL, W/CORNER WRAPS.
12 GA SHEET DOGBOX

PAINT:

CONTAINER THOROUGHLY SCRAPED AND CLEANED.
EXTERIOR PRIMED WITH (1) COAT LOW V.O.C. ALKYD PRIMER,
(1) FINISH COAT OF HIGH SOLID LOW V.O.C. ENAMEL.
STANDARD COLORS ONLY.

 

© Copyright 2018, Southern Steel Containers. All rights reserved.