Products
Products > Roll-Off Containers > 40 CU YD STANDARD RECTANGULAR

<< Return

40 CU YD STANDARD RECTANGULAR

GENERAL:

CAPACITY-40 CUBIC YARDS
LENGTH- 22'
WIDTH- 8'
INSIDE HEIGHT 76"
WEIGHT- APPROXIMATELY 4810 #
MEETS ALL AMERICAN NATIONAL STANDARD SAFETY CODES.

FLOOR:

3/16" FLOOR PLATE (2) PIECE
3" STRUCTURAL CHANNEL CROSS MEMBERS/ 18" SPACING.
GUSSETS EVERY OTHER CROSS MEMBER.
6" X 2" X 3/16" STRUCTURAL TUBE RAILS, ONE PIECE NO SPLICES.
1 " THICK STEEL SOLID BULLNOSE.
1 1/4" THICK HI-TENSILE HOOK, INSERTED THROUGH 1" THICK STEEL HOOK PLATE.
4" DIAMETER X 6" LONG NOSE ROLLERS.
3/4" SUPPORT BRACKET FOR NOSE ROLLERS W/1/2" GUSSET PLATE
(4) WHEELS- 8" DIAMETER X 10" LONG.

SIDES:

12 GA. SHEET SIDES, 50" HIGH.
STRUCTURAL SIDE 12 GA. STEEL 4 WAY BEND, 3" DEEP, X 5" WIDE, ON 24"
CENTERLINE W/ HOLES AT BOTTOM FOR DRAINAGE.
3/4" PIPE TIE DOWN BAR .
FORMED TUBES & SIDE PLATE ARE FULL WELDED TO FLOOR PLATE ON OUTSIDE.
3" X 4" X 11 GA. TOP HORIZONTAL TUBE, IS FULL WELDED TO SIDE SHEET.
2 X 6 PROTECTIVE ANGLE OVER HOLD BACK PIPE

DOORS:

12 GA. SHEET.
(3) HORIZONTAL AND (2) VERTICAL STRUCTURAL TUBES, PRIME MATERIAL (1) PC.
(2) MACHINED HINGES 8" LONG, W/GREASE FITTINGS.
SEMI-AUTOMATIC CAM LOCKING SYSTEM WITH VERTICAL LIFT HANDLE.

BULKHEAD:

12 GA. SHEET.
3" DEEP X 5" WIDE STRUCTURAL 12 GA. STEEL, 4-WAY BEND. (2) VERTICAL &
(1) HORIZONTAL, W/CORNER WRAPS.
12 GA. SHEET DOGBOX.

PAINT:

CONTAINER SHALL BE THOROUGHLY SCRAPED AND CLEANED.
EXTERIOR TO BE PRIMED WITH (1) COAT LOW V.O.C. ALKYD PRIMER,
(1) FINISH COAT TO BE HIGH SOLID LOW V.O.C. ENAMEL.
STANDARD COLORS ONLY.

 

© Copyright 2018, Southern Steel Containers. All rights reserved.